arduino flappy bird game using tft lcd by push button tutorial

Description: 3.
5 \"display module with ease of adaptability and library flexibility has long been a reliable basis for bidding colors. 16-
Color TFT screen and 3. 5 \"in size.
It works as a touch screen to integrate the capacitive sensor, which allows us to control it by touching it directly with our fingers, with a resolution of 480 × 320 pixels, and its size is relatively high.
Use the ILI9481 driver.
Features: Screen size: 3.
5 \"Pixel: 480x320Color code: 262KDisplay size: 51mm x 77.
5 mmTouch: YesConnection: Arduino Mega Shield (Best value/due to size)
SD card support. . .
128GB 16 mb Chipset: ILI9481 (R61581, CTE32HR)
Viewing angle: WideControl: free supply voltage for personal or UTFT: 3.
Backlight supported by 3V and 5 VUTFT: permanent, internal control dimensions (mm): 97.
5*64mm * 15mm (shield)
In this tutorial, we only use simple hardware that does not require the use of breadboards and any other components.
No wiring required.
All you need is: * Please download UFTFConnect your arduino and 3.
Arduino tft LCD touch screen module and two (2)
Start button and reset button.
Make sure all pins are installed in their ports.
* You can follow the instructions below if the display is mirrored: Document> Arduino> Library> UFTF> tft _ drivers> ili9481 (for 3. 5\'\' TFT LCD)>edit initlcd.
H and change LCD _ write _ com (0x3A); LCD_Write_DATA(0x55);
After uploading completely, you can start playing the favorite flappy bird game. Enjoy!
Enjoy watching the tutorial!

Comments

Popular posts from this blog

ChiShui River canyon bridge

Face mask machine

The development of China inverter in inverter high-end brand market